What are the size and weight of Motop roof top tent?
We are having two types of motop roof tent which are (Version 4), MT-120 and MT-135. The numbers does not mean anything but the tent’s internal width, so the smaller version is 120 cm wide, while the bigger one is 135 cm wide respectively. The other dimensions are equal across both models, with the length of 217 cm and the height of 145 cm each. And also the outer dimensions are similar (225 m long and 150 cm high with a width of 128 cm or 1430 cm).
In travel mode, the smaller model measures 225 cm by 128 cm with a height of merely 16 cm. The MT-135 model is 225 cm by 143 cm with the same height which is 16 cm. The packed-up tent’s low profile makes it great for your 4WD’s shape and keeps the truck looking sleek whenever you climb the top areas.
Both models are relatively light for a hard-shell with a weight of 69 kg or 73 kg. You will still need a second pair of hands to help you with mounting and installation.
And if you’re on the market for a high-end Motop Plus RTT, the beefed-up version comes with extra perks, like added height (149 cm) and a few extra kilos of weight for 120 cm and 135 cm wide versions. The smaller model is 74 kg, while the larger weighs 79 kg.
Installation Of Motop roof
You wont be having any problem Installing your Motop roof top tent , as the Installing kit is included. What you will be needing is one or two of your friends to help you raise the setup onto the rooftop and a user manual to follow in it. The default hardware is usually enough for hassle-free installation. However, you should definitely check your 4×4’s roof load capacity to make sue the roof up can take the weight of your Montop tent. Considering the tent is barely 16 cm high when folded, you can leave it be after initial installation, because it won’t affect anything.
Setup and pack up instructions for the MW Motop roof top tent couldn’t be easier, and the whole process takes barely a minute. Once you unlatch the two clamps, simply push the roof of the tent up, and the struts will get it into place. Push the bungee cord around the base of the tent, install the flexible rods to support the awning over the door, and you’re done.
The reverse process is just as speedy, but you must be careful to push all the canvas inside the tent when closing the lid. It may take a few tries, but don’t give up. If you fail to pack the tent walls inside, the clamps won’t close properly, and your tent and bedding may get dirty or wet. The latest generation of the Motop roof top tent relies on a pair of pressure clamps, so getting them closed may take some effort. The easiest way to get them closed is to sit on top of the closed tent and let your weight push the halves closed.
Materials needed for Motop roof
The canvas walls of the Motop roof top tent are breathable, waterproof, and tear-resistant, thanks to the use of 280 gsm polycotton. It’s durable and resistant to wear and tear, meaning your tent will remain in near-mint condition for years to come. And the cover is nothing short of a technological marvel with its 20 mm thick aluminum honeycomb panel that’s not only sturdy but also lightweight and stylish thanks to a powder coating.
The two gas pistons that help you set up and pack up the tent in under a minute are made of durable stainless steel. Heavy-duty structs withstand up to 30 kg of load, meaning the tent’s top cover can be fitted with a luggage rack or even solar panels (more on those and other accessories in a minute).
While the Motop tent materials are nice, it’s the 60 mm self-inflating mattress that makes all the difference. It’s much comfier than the foam alternative, and you don’t have to use a topper to stay cozy. The top layer is a luxurious faux suede, and the bottom of the mattress is waterproof. Besides, the mattress is accompanied by an anti-condensation mat that solves the issue of damp bedding that’s been a bane of the previous Motop models. We love the new setup, as it lets you keep the bedding inside the tent with no issue, as the low profile made it impossible to keep the bedroll, pillows, and mattress topper inside versions one through three.
Features and Waterproofing
Poor air circulation has been a major drawback of the Motop roof top tent for years, but version 4 seems to have finally dealt with the issue. The three large doors/windows provide ample breathability, and once you zip them up to keep warm at night, the top lid insulation helps keep the condensation under control.
Temperature insulation is one of the major benefits of hardshell RTTs, and the Motop roof top tent is no exception. The top panel is insulated to keep the inside of the tent cool under the scorching sun and warm throughout the freezing nights. While it is nowhere near enough to withstand frigid winter camping trips, the RTT is great for the other three seasons.
The canvas and hardshell panels have proven to be waterproof and weather-resistant after three iterations. However, the common complaints about the previous models included poor seal in travel mode that resulted in wet bedding. Motop has been tweaking the design for years, and the newest edition seems to finally do the job. The rubber seals keep the dust and water out, while two compression latches ensure the tight contact between the bottom and top panels.